Hello There, Guest!


Registration Date: 09-11-2018
Date of Birth: Not Specified
Local Time: 04-20-2019 at 07:05 AM
Status: Offline

ksjk7634's Forum Info
Joined: 09-11-2018
Last Visit: 09-11-2018, 12:27 AM
Total Posts: 0 (0 posts per day | 0 percent of total posts)
(Find All Posts)
Total Threads: 0 (0 threads per day | 0 percent of total threads)
(Find All Threads)
Time Spent Online: 2 Minutes, 38 Seconds
Members Referred: 0
Reputation: 0 [Details]

ksjk7634's Contact Details
Email: Send ksjk7634 an email.
Private Message: Send ksjk7634 a private message.
Additional Info About ksjk7634
Location: http://www.dgtriangle.com/screen-printing-silicone/table-printing-silicone-ink/
Sharp HD silicone for textile printing, Two component A:B=1:1, no need extra catalyst curing agent. Easy to export and shipping to international market. Its'working time would be up to 72 hours after mixed for which on table printing it would never block mesh, but it would flash cure within 10 seconds under flash-cure over 70 degree. In this way, Workers no need to prepare new silicone after two or three hours. Easy to operate and accepted by workers. Easy to get sharp effect for high density printing on printing tables.
No silicone waste, easy to control labor cost.
Code NO. T-J05AB
Durometer - Shore A33 Shore A
Dynamic Viscosity300000 Centipoise
Elongation362 %
Pot Life72 hours
Shelf Life360 Days
Solids Content> 98 %
Specific Gravity @ 25C0.95
Tear Strength4.3Mpa
Tensile Strength1015.3 psi
5kg/barrel; 20kg/barrel
After printing, silicone can be cleaned away from equipment with hydrocarbon based solvent.
1.What is your MOQ?
It depends on customer's exact request.
2.Are you manufactuer or trading company?
We are silicone ink and silicone heat transfer labels manufacturer, but we also do some trading according to customers trust.
3.Where is your main market?
Our main market based in Asian and south America countries where there are more printing factory for garments or shoes.
4.What is your lead time?
Normally in 3~15 days according to order quantity.
5.What is your payment payment ?
T/T, Western Union, PayPal
1. Triangle new series of silicone is mixed in rate of A:B=1:1, no need catalyst for curing which is much better to operate and control.
2. Our silicone is workable for both machine and table production which would not block mesh.
3. Heating temperature of our silicone heat transfer stickers is 155~170℃, 15~20 seconds according to different fabrics and thickness.
4. The order we delivered if its not match your request, pls keep it sealed well for replacement.
Textile silicone printing solution:
How to print brush silicone effect on fabrics?
Raise thickness between screen and printing table for enough silicone to pass through; change your handling to around 45 degree for more silicone to pass for first several layers; clean silicone well on screen on last 3-4 layers. Surely, it would take time to finish silicone brush printing. With out long working time silicone, it would save muchChina Table-printing Silicone Ink suppliers
Sex: Undisclosed

Powered By movga, © 2002-2019 Movga Group.